In the rapidly evolving world of electronics manufacturing, choosing the right method for producing components is crucial. Metal stamping stands out as a preferred choice for many, but why? Let’s explore the reasons behind its popularity.
Qisheng supply professional and honest service.
Metal stamping is favored for electronic components because it has a fast processing time and requires less labor than other methods.
To fully grasp the advantages of metal stamping in electronics, let’s delve deeper into its benefits and applications.
As the electronics industry has evolved, so too have the methods used to produce its components. Among these, metal stamping has emerged as a dominant force, offering unparalleled advantages in both efficiency and precision.
The journey of metal stamping in electronics can be traced back to the mid-20th century. As the demand for electronic goods surged post World War II, manufacturers sought faster, more efficient ways to produce components. Enter metal stamping. Initially adopted for its speed and cost-effectiveness, it quickly became evident that stamping also offered exceptional precision—critical for the intricate components of electronic devices. Over the decades, as technology advanced, metal stamping adapted, incorporating newer techniques and materials, ensuring its position as an indispensable tool in the electronics manufacturing arsenal.
Metal stamping’s versatility is evident in the wide array of electronic components it helps produce. Some of the primary applications include:
From everyday gadgets to advanced aerospace equipment, metal stamping plays a pivotal role in shaping the electronics we rely on daily.
In the intricate world of electronics manufacturing, precision, speed, and cost-effectiveness are paramount. Metal stamping, with its unique attributes, has proven to be an invaluable asset in this domain. Let’s delve into the specific advantages it brings to the table.
In an industry where time is often equated with money, the swift processing capability of metal stamping is a game-changer. Traditional methods might require multiple steps and processes, but stamping can achieve the desired shape or form in a single press. This rapid production rate is especially beneficial in the electronics sector, where market demands can fluctuate, and manufacturers need to adapt quickly. With metal stamping, large batches of components can be produced in a fraction of the time, ensuring that supply always meets demand.
Beyond the sheer speed of production, metal stamping also offers significant labor efficiencies. Automated stamping presses can operate with minimal human intervention, reducing the need for extensive manual labor. This not only translates to cost savings but also ensures a consistent production quality, free from human error. In an industry where precision is non-negotiable, this level of reliability is invaluable.
Speaking of precision, metal stamping excels in producing components with exacting standards. The dies used in stamping are crafted with meticulous attention to detail, ensuring that every component produced is consistent with the last. In the realm of electronics, where even the slightest deviation can lead to functional discrepancies, this consistency is crucial. Whether it’s connectors that need to fit just right or shields that must offer precise protection, metal stamping ensures that every part is up to the mark, every single time.
While metal stamping has carved a niche for itself in the electronics industry, it’s essential to understand how it stacks up against other manufacturing methods. Let’s delve into a comparative analysis.
Both metal stamping and casting are popular methods for shaping metal, but they serve different purposes and have distinct characteristics:
When it comes to cost, several factors come into play:
Metal stamping’s prominence in the electronics industry isn’t just theoretical. Numerous companies have reaped tangible benefits from its application, and continuous innovations ensure its relevance in the ever-evolving tech landscape.
The world of metal stamping isn’t static. As the demands of the electronics industry evolve, so do the techniques and technologies in stamping:
Metal stamping, with its blend of speed, precision, and cost-effectiveness, has firmly established itself as a cornerstone in the electronics manufacturing landscape. From the intricate connectors that power our favorite gadgets to the electromagnetic shields ensuring optimal device performance, stamping plays a pivotal role in bringing technology to life.
Its advantages are not just theoretical. As showcased through real-world success stories, companies across the spectrum have harnessed the power of stamping to drive efficiency, reduce costs, and enhance product quality. And with continuous innovations, from high-speed presses to smart dies, the future of metal stamping in electronics looks brighter than ever.
In an industry marked by relentless evolution and rising consumer expectations, metal stamping offers a robust solution to meet these challenges head-on. For manufacturers aiming to stay ahead of the curve, embracing the myriad benefits of metal stamping isn’t just a strategic choice—it’s an imperative for sustained success in the dynamic world of electronics.
Custom metal stamping is, by definition, designed exclusively for a specific part and its functions. Unlike mass-produced stampings, custom metal stamping is chosen when precision and complex dimensions are required to produce a unique part. This process requires the upfront development of a custom metal stamping tool that cuts and forms the part as the metal goes through the stamping press. Custom metal stampings can range from large components for automobiles and custom assemblies to micro-miniature parts for medical devices or electronics.
Stamping includes a variety of sheet metal forming processes consisting of either a single station operation where every stroke of the press produces the desired form of the metal part or could occur through a series of stages. The following techniques are used to achieve the desired shape in the press.
Bending creates a formed feature by angular displacement of a sheet metal workpiece. In some processes, one edge of the workpiece is clamped in a stationary position while the other edge is clamped by a metal tool and bent over a form to create a precise bend or shape. Alternatively, the metal piece may be pushed into or against a form.
The blanking process removes a metal piece from the primary metal strip or sheet when it is punched through the strip/sheet. The material that is removed becomes the new metal workpiece or blank.
Coining is a forming process that uses an extreme amount of pressure to push the workpiece into a die. The die then forms the metal into a precise shape and creates permanent forms in the workpiece. Coining also smooths the edges of metal parts by striking them with a high degree of force. This removes existing burrs and hardens the metal. Coining may reduce the need for deburring, grinding, and other secondary processes at the end of the project, which saves both time and money.
This process deforms the metal using only a punch and cavity. These dies do not control metal flow and cannot prevent the metal from wrinkling or buckling. They are used to form simple parts, such as brackets and braces, made from thick, stiff metals that are more wrinkle-resistant than thinner metals.
One of the most common stamping operations, cutting trims the metal into a part by the use of extremely high force in the stamping press. Cutting operations include trimming, notching, piercing, blanking, lancing, and shearing.
A complex drawing die is used to create large metal parts, such as automotive components. The process involves controlling the flow of metal into a cavity via a pressure-loaded draw pad to prevent wrinkling as the material flows over a forming punch.
Embossing is a cold-forming process used for creating specific formations or designs on metal pieces. Male and female embossing components press a workpiece between them with sufficient force to form the three-dimensional feature.
Extrusion forms the metal inside the diameter of a pierced hole, which may be used for applications such as holding fasteners during part assemblies.
The flanging operation bends metal along a curved axis, which may be used to form a projection or the rim of a part as it relates to part assembly and stiffness requirements.
Metal stamping involves a variety of forming operations. The stamping press forms the metal material by applying tension, compression, or both. The specific type of forming operation selected depends on the material’s properties and the part’s critical dimensions, balancing formability and strength.
Similar to the coining process, ironing employs compression to form the part by squeezing the metal along a vertical wall to achieve exact thickness and length dimensions.
In order to free up metal without separating it from the metal strip, lancing slices or slits the metal, which may be used in progressive dies as a part carrier.
This metal cutting operation, also called perforating, produces a hole in a formed part or sheet metal, which may be round, square or a custom shape. The slug is then discarded.
Pinch trimming is a special method in which the vertical walls of a drawn or stretched vessel are cut by pinching the metal.
This forming process uses a punch press to force a tool, called a punch, through the workpiece/material to create a hole and produces a scrap slug that is deposited into the die below the sheet metal.
Used primarily after major forming operations are complete, restriking employs an additional station in the die to finish precision details such as small embossing and sharp radii.
An operation used to eliminate or minimize die-break, while maximizing the amount of sheared edge. The general concept with shaving is to pre-punch the hole slightly smaller, then post-punch the hole to size, using a very tight die clearance. This can also be done on a straight or outside edge.
Want more information on Precision Stamping For Electronics? Feel free to contact us.
Cutting force is applied perpendicular to the material, causing the material to yield and break.
The trimming process achieves the specified profile of a stamped part by forming its perimeter or cutting away excess metal, with precision trimming designed to minimize scrap.
The method chosen for metal stamping production takes into account the complexity of the part and how metal stamping can best form that part. For precision parts with tight tolerances, the method may include the use of in-die sensors to continually monitor part quality, along with other inspection methods. The method also takes into account secondary operations, such as plating, heat treating, welding, and cleaning or sterilization.
Progressive metal stamping is a stamping process that advances a metal strip from station to station performing different operations on the same part in the die until the part is complete. Conical-shaped pilots are inserted into pre-pierced holes in the strip to ensure the precision of the alignment as the part advances to guarantee the accuracy of the finished product. Since the part is attached to a metal strip throughout its formation, the entire process and parts will be out of tolerance if the strip is off by even a tiny fraction of an inch.
Progressive die stamping offers some advantages such as being a highly repeatable process and since the material is continuously fed into the stamping press, long production runs can be completed, producing more finished parts in less time resulting in lower cost per part.
Progressive Stamping Delivers High Speed Production and Lower Costs.
Transfer die stamping uses one press to operate multiple tools. The part is removed from its metal strip so that it can be freely transferred. A part, which can be turned or rotated, is shaped by each station until it is complete. Automation of the transfer process streamlines the operation into a single press.
Transfer dies can handle many part features in one press pass, such as holes, cut-outs or threading, which can eliminate costly secondary operations.
Transfer die stamping is typically used for large parts like frames, tube applications, draws, shells, and structural components.
Is Progressive Die Stamping or Transfer Die Stamping Best for Your Next Precision Metal Stamping Project?
Beneficial for applications requiring recessed cavities, where the depth of the drawn part exceeds its diameter, deep drawing uses blanking, swaging or sizing to deform the base material and apply recessed features.
Fine blanking is optimal for parts that require very smooth, precise edges or exceptional flatness. Fine blanking is particularly suitable for moving parts such as gears. Fine blanking is a combination of metal stamping and cold-metal extrusion techniques, requiring special presses.
Progressive Stamping vs. Fine Blanking: Three questions OEMs Should Ask
Multi-slide / Four-slide stamping is best suited for fabricating complex components that have numerous bends or twists and for forming wire. The difference between multi-slide and four-slide is that four-slide metal stamping machines have four moving slides while multi-slide machines have more than four slides. The slides or rams in the machines strike the material to produce the finished parts.
Multi-slide / Four-slide equipment can manufacture complicated parts with multiple, complex, or over 90° bends and twists including clips, brackets, flat springs, terminals, retainers, and wire formed parts. Both flat and round materials can be formed.
A key factor in the success of a precision stamped part is specifying the best metal for the process and the application, ranging from lightweight aluminum to heavy-duty steel to high-cost precious metals. OEM engineers can benefit by consulting metal stamping specialists early in the part design phase to evaluate how metal stamping can work and the exact material specifications needed for the application at hand.
Material selection involves evaluating:
Some of the most commonly used materials for precision metal stamped parts include:
Carbon steel is one of the most popular materials used in metal stamping, which can take on many different forms, properties and finishes, offering optimal strength, performance and cost-effectiveness. Each year, steel production exceeds 1.3 billion tons worldwide. Basic steel is magnetic material. With the addition of chrome and nickel to make stainless steel, it loses its magnetic properties. Many different types of steel may be used including hot and cold rolled steel; stainless steel; high-tensile steel; low, medium and high carbon steel; and spring steel.
Aluminum offers many advantages for metal stamping applications. Aluminum has the highest strength-to-weight ratio of any metal. Aluminum conducts electricity better than copper and is non-magnetic. For companies seeking sustainability, aluminum is 100% recyclable without losing any of its natural characteristics. However, aluminum can be abrasive in tooling and is more expensive that steel.
Copper that is suitable for metal stamping comes in many forms, including such alloys as aluminum clad copper, brass, phosphor bronze, beryllium copper and aluminum alloys. Copper is often selected for stamped components and conductors for electronic devices, as well as electrical wiring, heating and plumbing, and other applications that require its extremely high electrical and thermal conductivity. Copper also resists corrosion while maintaining an attractive appearance. The softness of copper makes it one of the best metals for stamped parts.
With its reasonable price and flexibility, brass can work for almost any function in metal stamping. As an alloy of copper, brass can easily be soldered to copper. Brass is highly resistant to corrosion and will not rust. It is also effective in carrying electrical current while dealing with high stress very well. As a result of its unique properties, brass is one of the most-used metal materials in the world.
Titanium is known for its corrosion resistance and high-impact toughness. Titanium is very expensive to manufacture but has the highest strength to density ration of any metallic element. It is often used in aerospace structures and implantable medical devices.
Precious metals may be used as a plating or coating on stamped parts to increase conductivity or to add strength and corrosion resistance to the finished products. In metal stamping, designing a process that conserves the precious metal is critical, due to its high cost and limited availability in some cases. Manufacturers in the automotive, electronics, telecommunications and medical device industries are among the leading users of precious metals such as gold and palladium in critical parts.
Nickel alloys resist high pressure and maintain their properties under extremely high temperatures. They also offer high strength and toughness and excellent resistance to atmospheric corrosion. High nickel alloys are perhaps the most frequently used material for metal stamping production among the hundreds of specialty alloys used in the industry.
Each industry favors particular metals for their precision metal stampings, due to their unique applications and the environmental and operating conditions that the parts must withstand. For example, stamped parts for the automotive industry must be able to hold up under extreme heat and cold, as well as contact with a variety of liquids, while medical devices require high sanitation and safety standards, and electronic parts require electrical conductivity.
Production of precision metal stampings involves a complex process that begins with design collaboration between the stamper’s and the manufacturer’s engineers. Software simulations are often followed by developing a prototype tool to produce sample parts. Full production planning takes into account every step of the process from custom tool design and stamping through finishing and assembly/packaging to ensure that all critical specifications are met, with quality control from start to finish.
Metal stamping engineers can offer solutions for cost-effective part design and production upfront during the estimating process, as they review the part design, prints and material specifications. Using advanced technology, such as 3D CAD, metal stampers can test design options and recommend improvements to reduce failure risk and increase functionality, while meeting all critical specifications and quality standards.
With the development of new custom stampings, it can pay to test and analyze small quantities of stampings before investing in full production. By building a prototyping tool to run sample parts and using simulation software to evaluate how the part and material will function in the tool, the metal stamper can identify and correct potential weaknesses prior to production, which saves on development costs and time to market. The stamper may recommend specialized tool functions, such as progressive dies or in-die assembly, to improve manufacturability.
Collaboration between the manufacturer's technical staff and the metal stamper's engineers in the initial planning stage is key to ensuring efficient production and long-term functionality of the part. In-depth planning sessions allow for review of:
For manufacturers in the planning process for new products, the technical team of the precision metal stamper can add valuable guidance upfront to help speed time to market.
A designated project manager is responsible for ensuring the project is completed on time and on budget and for communicating status updates to the cross functional team.
Tool designers review technical specifications and provide critical feedback for tool design. Once designs are approved, highly complex, high-precision tools are built, often including in-die sensors to ensure tool safety and consistent quality. Tooling experts conduct preventative maintenance to ensure tools last the duration of the program with little or no downtime.
Sophisticated technology is used for high-speed, precision metal stamping, with a variety of presses that are augmented with advanced features such as electronic servo feeds, robotics, and real-time quality control. Multiple operations like in-die tapping, in-die fastener insertion and in-die assembly can be performed in the stamping press, which can eliminate the need for those secondary operations.
Secondary operations are often required to fully finish the metal stamped part for seamless integration into a product or system. Parts may need to be trimmed or welded. Finishing techniques such as coating, plating, polishing or deburring may be chosen to inhibit corrosion, improve appearance, or smooth sharp edges. Metal stampers provide many services in-house, such as cleaning and custom assembly, and also coordinate with approved suppliers for specialized metal finishing services, such as welding or electropolishing.
Metal stamping engineers evaluate assembly and packaging needs in the production planning phase to ensure finished parts are ready for further production or shipment when delivered to the manufacturer. Parts may be shipped fully assembled or as sub-assemblies and packaged based on manufacturer specifications (i.e. reel-to-reel, loose piece, on a bandolier).
Precision metal stampers apply mistake-proof processes that incorporate quality controls into every phase of a metal stamping project. Company-wide information sharing systems ensure quality commitments are understood and implemented by every project team member. Sophisticated quality control technology is leveraged throughout the process to ensure zero defects, such as in-die sensors, real-time statistical process control, and optical vision systems.
Are you interested in learning more about Connector Precision Components? Contact us today to secure an expert consultation!