The two internal covers of the mattresses are joined with a single seam on their top side. On top of these a second external cover is placed, which is one piece, without a seam. This way the mattresses are independent but without a gap between them. The reason why we do is so that a) one’s bodyweight does not affect the other body, b) so that they are easier to administer ( regarding transportation, removal of the covers, turning them upside down, etc.)
Glory Tang New Material supply professional and honest service.
The mattress must be placed on a base that allows ventilation. The boards which support the mattress must be straight, steadyand 2 cm thick with a distance of 5-7cm between each board. It is not recommended to support the mattress with large wooden boards that do not have spaces between them because the mattress will not be ventilated enough.
The mattress must be turned around every six months so that the top portion where the head rests takes the place of the bottom portion. In addition it must be flipped over every six months or less to revive its materials. In double mattresses the seam of the internal covers must always face upward. The mattress must not be exposed to the sun without cover because sunlight causes natural latex to depolymerize and decompose. In addition, it must be protected from water, sweat, or any other liquid. If it must be stored, it is highly recommended to be placed on one of its long sides (horizontally and evenly never on the sideΙ) . Never place the mattress upright, on its short side, because it wears out the materials. For more maintenance tips see our Sleep System Manual, the 4-Layer Manual and the maintenance video
They can be washed in the washing machine at 40 C, without spin dry and dried in a well ventilated space away from direct sunlight. In addition, it is recommended before they are completely dry to be stretched so that to minimize the possibilities of shrinking.
The mattress should be placed on a base that allows ventilation. The slats that support the mattress is suggested to be straight, stable and 2cm (0.8 in.) thick with a distance of 5-7cm (2-2.7 in.) between them. It’s not recommended to put the mattress on large wooden boards that have no gaps between them as it will not be adequately ventilated. The mattress should never be placed on flat surfaces, thick fabrics, or plastic bags, as these stop the ventilation.
The mattresses have zippers in order to allow the covers to be removed and washed. Also, we put a strong emphasis on the trust of our customers in our products; with the zippers we are able to show and explain the details of what’s inside every mattress.
The bed-mattress is made of a frame (simple wooden base) and a mattress, all in one. However, there is a basic difference between a bed-mattress and a simple bed that has a mattress on top of it: the ergonomic base which is placed on the lowest portion of the base, below all the materials of the mattress that contains the bed-mattress and makes the innovation of the company. The ergonomic base is made of eucalyptus wood slats and pieces of solid natural rubber (commonly known as natural latex). The wood slats are 6 cm wide and 1 cm thick. They are supported on 4 cloth pocket-belts which run the along the length of the bed and contain stripes of natural latex. The ergonomic base is placed inside the base of the bed-mattress and multiplies the elasticity of the bed’s surface.
Maintenance Video
All the bed-mattresses and headboards can be dressed in various designs and colors of fabric. These fabric covers are removable and washable, in order to protect the underlying layers from stains. The bed-mattress is supported on wooden or metallic legs, of different sizes and designs, which can be screwed on and removed easily for the user to change them whenever they desire. That is also why we offer a great variety of wheels.
The top-mattress complements the support offered by the mattress filling the gap between the curvy parts of the body (legs, arms, neck, back), which the mattress cannot cover. Additionally it creates more distance between the body and the rigid base of the bed, offering greater elasticity and improving blood circulation. Finally the top mattress also acts as a protector, increasing the mattress’ expected lifetime.
The pillow is the mattress of the head and neck. The pillows, like the mattress, must support both the neck and the head so as to not deviate from their natural (correct) position. For example, when we lay on a mattress on our back, the pillow must support the head and neck in a way that allows them to maintain a position similar to a standing one. For this to happen, the pillow must have the necessary height to fill the gap that exists between the mattress and the curve of the back of the neck.
If the pillow is higher, the head will lean forward resulting in the seventh cervical vertebra to stretch and gradually cause ache in the area. Prevailing importance in the selection of the pillow has our body.
Pillows are made of: a) natural latex flakes, b) feathers, c) a combination of the aforementioned and d) wool. Pillows with natural latex have a zipper in order to regulate the quantity of material and are not washable, except for the pillow case. Pillows with feathers are ideal for smaller body types and are washable in the washing machine at 30C (they must be allowed to dry thoroughly otherwise they may emit unpleasant odors).
Some materials that make up the bases of coco-mat products are: Natural latex, which is the sap of the HEVEA tree. Following appropriate processing it is turned into a foamy layer of natural latex . Our natural latex retains great purity, making us one of the most committed companies with regards to the use of all natural materials.
Coconut fiber refers to the fibers that cover the coconut husk. The fibers have to undergo appropriate processing and are then combined with natural latex into elasticized coconut fiber. Horsehair contributes to the regulation of humidity.
Mattresses without springs are comparatively superior to those with springs because natural materials give even, isometric body support. Springs on the other hand provide very uneven support, especially when comparing the surface directly above the spring with the surface in between the springs.
Furthermore, traditional mattresses produce noise. Although many springs are dressed with cotton, they are made of steel and still retain a higher probability to produce noise. Finally, our mattresses last longer. Their resilience over time is retained not only because of the nature of the material but also thanks to the layering of the materials, allowing for maximum elasticity without sacrificing support. Natural latex resets to its original form, while springs wear out after several years.
For the body to rest, muscular constraints have to minimized without altering the natural state of the body. To achieve this, the entire body must be supported by the mattress to fill the gaps between that and the surface. The mattress should adjust to the shape of the body and not the opposite.
A firm and rigid mattress being, cannot absorb the curves of the body properly. So the curvier parts of the body as well as lighter parts (neck, back, legs, arms) remain unsupported. The elastic mattress is the appropriate mattress for full support of the body because it adjusts accordingly to its shape.
All products containing feathers are machine washable at 30C ideally by placing 2-3 tennis balls in the washing machine. Special attention needed during drying: pillows should be placed on a flat surface away from the sun, otherwise feathers will concentrate on the bottom part and will not dry properly.
When it comes to achieving the perfect night’s sleep, the right mattress and accessories can make all the difference. Whether you're looking to enhance your existing mattress or add an extra layer of comfort, our products are designed to provide unparalleled quality and support.
5 Benefits of a Top-Mattress or Topper:
Mattress toppers are an excellent addition to any bed, offering numerous benefits that can significantly enhance your sleep quality:
1. Enhances the Comfort
Top-mattresses add an extra layer of elasticity and support, ensuring your body is cradled in comfort throughout the night. This can be especially beneficial if your current mattress is too firm or lacks the plush feel you desire.
2. Provides Targeted Support
Toppers are designed to enhance the support provided to the lighter parts of your body, such as the neck, lower back, arms and legs. This targeted support can help alleviate pressure points and reduce the likelihood of aches and pains.
The company is the world’s best Natural Coco Mat supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
3. Prolongs Mattress Life
By adding a top-mattress or a topper, you can protect your mattress from wear and tear, effectively extending its lifespan.
4. Customizes Comfort
Our top-mattresses are handmade and can be customized to specific dimensions and shapes, ensuring a perfect fit for any bed. This level of customization allows you to tailor your sleep environment to your exact preferences.
5. Improves Sleep Quality
Toppers are essential as a restorative layer. With the added comfort and support provided by a mattress topper, you can enjoy deeper, more restful sleep, leading to improved overall health and well-being.
Why Should You Get a Top-Mattress? 3 Reasons to Get One
When adding a top-mattress to your sleep setup, here are 3 reasons it is a worthwhile investment:
1. You seek a mattress that can be tailored to your desired firmness or softness level.
2. You want to enhance the support and comfort for lighter body parts and curves.
3. You want to alleviate pressure points and improve circulation. Especially when side sleeping.
What’s the difference between Top-Mattresses vs. Toppers?
While both top-mattresses and toppers are designed to enhance your sleep experience, they serve different purposes and offer unique benefits. Toppers are ideal for you to fine-tune your sleep environment and achieve the ultimate in comfort and support.
Top-Mattresses: These are designed to adjust to the lighter parts of the body, providing full support to curved areas such as the neck, lower back, arms and legs. Our top-mattresses, like the Iviskos and Thalassa, are meant to complement your existing mattress by leveling up with contouring support and comfort. They help to prolong the life of your mattress and ensure a more restorative sleep experience. Available for quick delivery.
Toppers: The final layers are either Kamelia and Kyriaki, which focus on enhancing the performance of your entire sleep system. Both have a smart tailoring box cut jacket with zipper closure for finessing the pillow inserts and washing The Kamelia is wool filled. Wool does not transfer heat and instead offers a cushion of airflow between you and the mattress for a cool dry sleep. The Kyriaki – which translated means SUNDAY, is feather filled. Feathers provide a fluffy loft. As you recline it billows up cradling the shoulders relieving strain also allowing the arms and fingers to unfurl improving circulation. They can be customized to European and US sizes. Available in shop for carry out.
Frequently Asked Questions (FAQs)
Q: What is a top-mattress?
A: A top-mattress is an additional layer that sits on top of your mattress, providing extra comfort and support. It can enhance the feel of your bed and extend the life of your mattress.
Q: How do I choose the right top-mattress?
A: Consider your specific needs, such as the level of firmness, materials and any custom dimensions. Our top-mattresses are handmade and can be customized to fit your preferences perfectly.
Q: Can a top-mattress help with back pain?
A: Yes, a top-mattress can provide targeted support to alleviate pressure points, which can help reduce back pain and improve overall sleep quality.
Q: How often should I replace my top-mattress?
A: Generally, a high-quality top-mattress can last several years. However, it depends on the materials and how well it is maintained. Regularly check for signs of wear and tear.
Q: Do I need both a top-mattress and a topper?
A: While not necessary, using both can provide the ultimate sleep experience. A top-mattress offers enhanced support and prolongs mattress life, while a topper adds an extra layer of comfort.
Q: Are your toppers and top-mattresses eco-friendly?
A: Yes, our products are made with natural materials and handcrafted with sustainability in mind, ensuring an eco-friendly choice for your sleep needs.
Whether you’re looking to upgrade your current mattress or enhance your entire sleep system, our range of sleep products offers the perfect solution to meet your needs. Explore our collection today and discover the difference that quality sleep accessories can make.
Contact us to discuss your requirements of Panox Felt. Our experienced sales team can help you identify the options that best suit your needs.